基于PI法的门源MS6.4地震前震中附近地震热点图像异常变化研究

基于1980年以来青海省和甘肃省区域地震台网的定位地震目录，分析了研究区最小完备震级，选取空间网格尺度为0.2°×0.2°、地震活动异常学习时间段和预测时间段均为3 a，应用图像信息（PI）法，分析了门源M_S6.4地震发生前震中附近地震热点图像的异常变化过程。结果表明，在2013年1月1日至2016年1月1日的预测时间窗内，冷龙岭断裂和祁连山北缘断裂附近存在明显的地震热点，且地震热点图像颜色偏深，发震概率较高，向前滑动至2014年1月1日至2017年1月1日，2015年1月1日至2018年1月1日和2016年1月1日至2019年1月1日3个预测时间窗，此两断裂附近仍存在地震热点，地震热点图像颜色逐渐由深变浅，而门源M_S6.4地震就落在PI法得到的地震热点内。门源M_S6.4地震前存在明显的地震热点，且地震热点相对集中，地震热点图像颜色由深变浅，震后消失；在祁连山北缘断裂附近，地震热点持续存在，分布较集中，地震热点图像颜色也呈由深变浅的过程。未来需关注祁连山北缘断裂，附近有发生强震的可能。     

Regulating Phase Junction and Oxygen Vacancies of TiO2 Nanoarrays for Boosted Photoelectrochemical Water Oxidation

In this study, we have provided a facile solution to synthesize well-aligned titanium dioxide nanorods by using hydrothermal reaction. By calcining the materials under different atmospheres and temperatures, a batch of titanium dioxides with excellent oxygen evolution reaction(OER) catalytic efficiency were obtained. This new structured TiO₂ photoanode material yields a high photocurrent density of 5.69 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE) under simulated solar light(100 mW/cm²). Surface photovoltage techniques and other measurements were carried out to confirm that the enhanced photoelectrochemical performances were attributed to the synergistic effect of the phase junction and a certain content of surface states, which accelerate the separation and transmission of the photogenerated charges. This material with phase junction and surface states promises a potential application in the field of photoelectric catalysis under solar light.     

Cu/CuO-Graphene Foam with Laccase-like Activity for Identification of Phenolic Compounds and Detection of Epinephrine

Although great progress has been made in the advancement of nanozymes, most of the studies focus on mimicking peroxidase, oxidase, and catalase, while relatively few studies are used to mimic laccase. However, the use of nanomaterials to mimic laccase activity will have great potential in environmental and industrial catalysis. Herein, Cu/CuO-graphene foam with laccase-like activity was designed for the identification of phenolic compounds and the detection of epinephrine. In a typical experiment, the formation mechanism of Cu/CuO-graphene foam was investigated during the pyrolysis process by thermogravimetric-mass spectrometry. As a laccase mimic, Cu/CuO-graphene foam exhibited excellent catalytic activity with a Michaelis-Menten constant and a maximum initial velocity of 0.17 mmol/L and 0.012 mmol∙L^-1∙s^-1, respectively. Based on this principle, Cu/CuO-graphene foam nanozyme could differentially catalyze phenolic compounds and 4-aminoantipyrine for simultaneous identification of phenolic compounds. Furthermore, a colorimetric sensing platform was fabricated for the quantitative determination of epinephrine, showing linear responses to epinephrine in the range of 3 mg/mL to 20 mg/mL with the detection limit of 0.2 mg/mL. The proposed Cu/CuO-graphene foam nanozyme could be applied for the identification of phenolic compounds and the detection of epinephrine, showing great potential applications for environmental monitoring, biomedical sensing, and food detection fields.     

喷雾干燥-固相煅烧法制备球形钛酸狸负极材料的研究

通过喷雾干燥-固相煅烧法制备了球形钛酸钾.不同于传统喷雾干燥工艺采用固态钛源进行制备,本文采用的前驱体是钾盐,分散剂和钛酸四丁酯制备出的硝酸氧钛的混合溶液.由于制备方法中前驱体为原子级均匀分布,化学计量比可精确控制,制备出的材料颗粒细小,粒径、成分分布均匀,电化学性能优异.同时研究了不同钾钛摩尔比以及煅烧温度对球形钛酸钾的形貌和成分的影响,并研究了其作为钾离子电池电极材料的电化学性能.结果表明,钾钛摩尔比为0.816,煅烧温度为 800 ℃时钛酸钾的电化学性能最好,首圈容量 185.1 mAh/g,30 圈后容量为173.9 mAh/g,循环100圈后还有169.7 mAh/g的容量.     

SiC中间层对金刚石涂层硬质合金刀具膜 基界面结合性能的影响

基于第一性原理分别计算了WC-Co/Graphite/Diamond、WC-Co/SiCC-Si/Diamond和WC-Co/SiCSi-C/Diamond界面模型的粘附功、断裂韧性,分析了电子结构和态密度.结果表明:Graphite/Diamond界面粘附功极小,金刚石在石墨基面上成核不良;WC-Co/Graphite界面处Co与C(Graphite)原子具有同种电荷而相斥,添加SiC中间层改变了界面处原子的电荷分配与成键方式,WC-Co/SiC界面Co与C(或Si)原子具有异种电荷而相吸,且Co-Si(SiC)键强于Co-C(SiC)键;SiC/Diamond界面C(SiC)-C(Diamond)键强于Si(SiC)-C(Diamond)键.因此,三种界面模型中各界面的粘附功SiCSi-C/Diamond>SiCC-Si/Diamond>WC-Co/SiCSi-C>WC-Co/SiCC-Si>WC-Co/Graphite>Graphite/Diamond.总之,添加SiC中间层提高了金刚石涂层硬质合金刀具膜基界面结合性能.     

机械力固相法制备纳米α-FeOOH及其光催化性能研究

采用机械力固相法以FeCl3和Fe(NO3)3分别作为铁源.在铁源与碱1∶5摩尔比的条件下,先球磨3h,再经过60℃水浴陈化得到纳米针铁矿(α-FeOOH).用X-射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、比表面和孔隙度分析仪(BET)、紫外-可见分光光度计以及电化学工作站对其物相、微观形貌、比表面、光催化和光电化学性能进行表征.结果 表明:不同铁源的阴离子会诱导合成形貌和性能差异的纳米针铁矿,以FeCl3为原料合成的纳米α-FeOOH粒径较小、比表面积及孔容较大、对有机染料罗丹明B的降解率较以Fe(NO3)3为原料的α-FeOOH提高了48.7;.     

Cu过量对Cu1+x Al1-x O2(0≤x≤0.04)薄膜结构与光电性能的影响

以单相多晶Cu1+x Al1-x O2陶瓷做靶材,采用射频磁控溅射方法在石英衬底上沉积了Cu过量的Cu1+x Al1-x O2(0≤x≤0.04)薄膜.通过X射线衍射(XRD)、紫外吸收光谱以及电导率的测试,表征了不同含Cu量Cu1+x Al1-x O2薄膜的结构与光电性能.结果表明,沉积态薄膜经退火处理后,由非晶转变为具有铜铁矿结构的纯相Cu1+x Al1-x O2;退火态薄膜在可见光区域的平均透过率约为55;,平均可见光透过率不受Cu含量的影响;退火态薄膜样品的室温电导率随Cu含量的增加而增大,Cu1.04 Al0.96 O2的室温电导率最高,为1.22×10-2 S/cm;在近室温区(200～300 K),退火态薄膜均很好地符合Arrhenius热激活模式.     

大型偏心结构吊装欠约束问题研究

吊装施工过程中被吊模块的水平度是作业要求的重要指标,通常需要增加配重调平。传统有限元方法需要补充约束以消除单元刚体位移,且需要重复计算平衡方程来求解调平载荷,效率不高。将模块的运动分解为随动坐标系的整体运动以及相对该坐标系的弹性变形,可将欠约束问题化为多体系统的静平衡问题。基于虚功率原理推导了吊装平顺时刻的节点力平衡方程以及相应的切线刚度矩阵,并将配重表示为基础配重与载荷系数相乘的形式。通过对节点力平衡方程求导,得到一组以载荷系数为自变量的微分方程,通过求解微分方程并结合水平度判据,可快速搜寻满足水平度要求的载荷系数。数值算例表明,该方法在解决偏心模块吊装欠约束问题方面具有明显的优势,在确定配重载荷方面具有较快的速度和合理的精度。